# General RealDash discussion

**URL:** https://forum.realdash.net/c/general/general-realdash-discussion/16.md

[Latest](https://forum.realdash.net/latest.md) · [Categories](https://forum.realdash.net/categories.md) · [Tags](https://forum.realdash.net/tags.md)

---

## [About the General RealDash discussion category](https://forum.realdash.net/t/about-the-general-realdash-discussion-category/21)

<div class="topic-metadata">

**Author:** [@system](https://forum.realdash.net/u/system)\
**Replies:** 1\
**Last updated:** [August 5, 2025, 12:34pm UTC](https://forum.realdash.net/t/about-the-general-realdash-discussion-category/21 "2025-08-05T12:34:35Z")

</div>

Discussion about RealDash topics that do not fit elsewhere

---

## [Linux version info and install instructions](https://forum.realdash.net/t/linux-version-info-and-install-instructions/1098)

<div class="topic-metadata">

**Author:** [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Replies:** 288\
**Last updated:** [October 15, 2026, 3:50pm UTC](https://forum.realdash.net/t/linux-version-info-and-install-instructions/1098 "2026-10-15T15:50:49Z")

</div>

Though of opening a new thread for discussion about RealDash Linux version. Please report any problems or Linux version related requests here. Current Linux version is build on top of Xorg and requires X11 desktop envir…

---

## [Sortable Target ID List + Updates](https://forum.realdash.net/t/sortable-target-id-list-updates/11262)

<div class="topic-metadata">

**Author:** [@frongus](https://forum.realdash.net/u/frongus)\
**Replies:** 3\
**Last updated:** [September 24, 2026, 9:32am UTC](https://forum.realdash.net/t/sortable-target-id-list-updates/11262 "2026-09-24T09:32:49Z")

</div>

I’ve made a sortable list using Google Sheets referencing the official Target ID list, since that one unfortunately cannot be sorted, for example alphabetically, right now. I’ve also added some notes, where I found it us…

---

## [How can I suppress this request on startup?](https://forum.realdash.net/t/how-can-i-suppress-this-request-on-startup/10738)

<div class="topic-metadata">

**Author:** [@sholland](https://forum.realdash.net/u/sholland)\
**Replies:** 7\
**Last updated:** [July 25, 2026, 6:27am UTC](https://forum.realdash.net/t/how-can-i-suppress-this-request-on-startup/10738 "2026-07-25T06:27:04Z")

</div>

Every time I start RealDash I am getting a request “Allow RealDash to access u-blox GNSS receiver?”. I hit OK and everything works fine, but how can I stop it from asking?

---

## [Decoding CAN data](https://forum.realdash.net/t/decoding-can-data/10067)

<div class="topic-metadata">

**Author:** [@Cl\_eav](https://forum.realdash.net/u/Cl_eav)\
**Replies:** 4\
**Last updated:** [March 23, 2026, 7:50am UTC](https://forum.realdash.net/t/decoding-can-data/10067 "2026-03-23T07:50:42Z")

</div>

Hi, Just thought I’d share something that I think is pretty cool!! I have been using Claude Code to analyse my CANlogs, I explain what the log contains, like; this log I’m getting in the car, turning on the ignition w…

---

## [Map Orientation](https://forum.realdash.net/t/map-orientation/978)

<div class="topic-metadata">

**Author:** [@linkkoriri](https://forum.realdash.net/u/linkkoriri)\
**Replies:** 10\
**Last updated:** [January 9, 2026, 8:09am UTC](https://forum.realdash.net/t/map-orientation/978 "2026-01-09T08:09:17Z")

</div>

I was wondering if there was a setting so that instead of keeping the map north and changing the direction of the arrow, it keeps the arrow facing upward and rotating the map to your direction instead? Not like 3D as I’…

---

## [Suitability for my project?](https://forum.realdash.net/t/suitability-for-my-project/9058)

<div class="topic-metadata">

**Author:** [@Dan81](https://forum.realdash.net/u/Dan81)\
**Replies:** 2\
**Last updated:** [October 3, 2025, 9:21am UTC](https://forum.realdash.net/t/suitability-for-my-project/9058 "2025-10-03T09:21:54Z")

</div>

There is a lot of information on here to suggest that this would be suitable for my project but I am here to ask for confirmation if thats cool. First if ive posted in the wrong place please shuffle me of to the appropr…

---

## [New Boss on the Block](https://forum.realdash.net/t/new-boss-on-the-block/8643)

<div class="topic-metadata">

**Author:** [@Daniel\_Gotz](https://forum.realdash.net/u/Daniel_Gotz)\
**Replies:** 8\
**Last updated:** [September 24, 2025, 6:14am UTC](https://forum.realdash.net/t/new-boss-on-the-block/8643 "2025-09-24T06:14:35Z")

</div>

Hi guys. Regarding the New Boss on the block, Dash, it has three different screens inside this dash. Is there a way to delete some of these screens, keeping just one? For Example, I want to have just screen 1. screen 1: …

---

## [Incorrect Gear Display](https://forum.realdash.net/t/incorrect-gear-display/8895)

<div class="topic-metadata">

**Author:** [@jrizing](https://forum.realdash.net/u/jrizing)\
**Replies:** 2\
**Last updated:** [September 8, 2025, 6:47am UTC](https://forum.realdash.net/t/incorrect-gear-display/8895 "2025-09-08T06:47:36Z")

</div>

Hi, Is there a way in Realdash to change the gear display for park, reverse, neutral and drive? I’m using a Link G4X and the data it sends out 9 = Park, 10 = reverse, 11 = neutral and 12 = drive.

---

## [0 set calibration](https://forum.realdash.net/t/0-set-calibration/7974)

<div class="topic-metadata">

**Author:** [@Lilgarage](https://forum.realdash.net/u/Lilgarage)\
**Replies:** 3\
**Last updated:** [May 4, 2025, 11:03am UTC](https://forum.realdash.net/t/0-set-calibration/7974 "2025-05-04T11:03:20Z")

</div>

I would like to implement 0-point calibration with a button. I have loaded the suspension strokes into App. I want the stop to calibrate the stroke value (ex 20mm) as 0mm and return a negative value if the suspension e…

---

## [Trigger storage of snapshot value into a Dummy variable](https://forum.realdash.net/t/trigger-storage-of-snapshot-value-into-a-dummy-variable/7879)

<div class="topic-metadata">

**Author:** [@mmain](https://forum.realdash.net/u/mmain)\
**Replies:** 3\
**Last updated:** [March 18, 2025, 8:45am UTC](https://forum.realdash.net/t/trigger-storage-of-snapshot-value-into-a-dummy-variable/7879 "2025-03-18T08:45:53Z")

</div>

I would like to know if it is possible to trigger the storage of a canbus value (snapshot) into a dummy variable, where this dummy variable is also included in the conversion calculation for another canbus value?

---

## [Location of Definition files](https://forum.realdash.net/t/location-of-definition-files/7800)

<div class="topic-metadata">

**Author:** [@drifter17a](https://forum.realdash.net/u/drifter17a)\
**Replies:** 3\
**Last updated:** [March 13, 2025, 12:32pm UTC](https://forum.realdash.net/t/location-of-definition-files/7800 "2025-03-13T12:32:05Z")

</div>

Hello, where is the location of definiation files on windows? I can’t see them and repository git-hub shows last checkout of link was 2 years ago for Link ECU I see Link Short and Link Generic Stream but in Repository …

---

## [RealDash\_CAN\_teste\_tacometro.ino](https://forum.realdash.net/t/realdash-can-teste-tacometro-ino/6075)

<div class="topic-metadata">

**Author:** [@Valter](https://forum.realdash.net/u/Valter)\
**Replies:** 7\
**Last updated:** [February 20, 2025, 10:38pm UTC](https://forum.realdash.net/t/realdash-can-teste-tacometro-ino/6075 "2025-02-20T22:38:48Z")

</div>

I’m having trouble viewing how the RealDash screen works. RPM includes some tachometer lines in the ino code, but it doesn’t make the tachometer work on the RealDash screen. The sensor even reads the pulses when you pass…

---

## [DBC to RealDash CAN XML Converter (WIP)](https://forum.realdash.net/t/dbc-to-realdash-can-xml-converter-wip/1094)

<div class="topic-metadata">

**Author:** [@cloudy](https://forum.realdash.net/u/cloudy)\
**Replies:** 10\
**Last updated:** [February 13, 2025, 1:30pm UTC](https://forum.realdash.net/t/dbc-to-realdash-can-xml-converter-wip/1094 "2025-02-13T13:30:32Z")

</div>

Got fed up trying to hand copy definitions I already have in DBC over to realdash format. I have written a converter that will do this automatically. I’ve tested on some files I have, and seems OK for most cases. Seems …

---

## [Peak gauge values/reset](https://forum.realdash.net/t/peak-gauge-values-reset/1411)

<div class="topic-metadata">

**Author:** [@hasole](https://forum.realdash.net/u/hasole)\
**Replies:** 6\
**Last updated:** [January 2, 2025, 4:07pm UTC](https://forum.realdash.net/t/peak-gauge-values-reset/1411 "2025-01-02T16:07:26Z")

</div>

Hi Is it possible to make a peak gauge i.e. Peak RPM or Peak MAP and then have a button to reset the values? Similar to the BTI dash Thanks

---

## [Bmw e81 and ms43 ecu can bus](https://forum.realdash.net/t/bmw-e81-and-ms43-ecu-can-bus/4943)

<div class="topic-metadata">

**Author:** [@share112](https://forum.realdash.net/u/share112)\
**Replies:** 12\
**Last updated:** [November 24, 2024, 8:11pm UTC](https://forum.realdash.net/t/bmw-e81-and-ms43-ecu-can-bus/4943 "2024-11-24T20:11:27Z")

</div>

Hi, im going to try to get realdash to work on ms43 ecu. I swapped m54b30 engine to bmw 1 series e81 2009. so because there is two diffrent protocols is it possible to make file so it dash shows fuel level from e87 chasi…

---

## [Where is RD heading in 2023?](https://forum.realdash.net/t/where-is-rd-heading-in-2023/1507)

<div class="topic-metadata">

**Author:** [@matt-c205](https://forum.realdash.net/u/matt-c205)\
**Replies:** 21\
**Last updated:** [November 1, 2024, 8:40am UTC](https://forum.realdash.net/t/where-is-rd-heading-in-2023/1507 "2024-11-01T08:40:35Z")

</div>

Any tid bits of information about what we might expect in Real Dash this year?

---

## [Samsung charging and serial USB](https://forum.realdash.net/t/samsung-charging-and-serial-usb/888)

<div class="topic-metadata">

**Author:** [@EE\_Steve](https://forum.realdash.net/u/EE_Steve)\
**Replies:** 11\
**Last updated:** [October 5, 2024, 9:31am UTC](https://forum.realdash.net/t/samsung-charging-and-serial-usb/888 "2024-10-05T09:31:29Z")

</div>

I have been battling this problem since Type C USB; where can i get a y cable that charges AND allows an FTDI serial cable tethering at same time??? I just received yet another today, it is a type C y cable, has type C…

---

## [Inverting Signal math](https://forum.realdash.net/t/inverting-signal-math/6514)

<div class="topic-metadata">

**Author:** [@Meels](https://forum.realdash.net/u/Meels)\
**Replies:** 2\
**Last updated:** [October 4, 2024, 8:51am UTC](https://forum.realdash.net/t/inverting-signal-math/6514 "2024-10-04T08:51:25Z")

</div>

Hey all Just wanting to know what the optimal way of inverting the math is on a simple signal light For instance My ABS light shows is on when it should be off and off when it should be on. value targetId=“273” offs…

---

## [ELM327 Data refresh rate](https://forum.realdash.net/t/elm327-data-refresh-rate/6172)

<div class="topic-metadata">

**Author:** [@Joshua1988](https://forum.realdash.net/u/Joshua1988)\
**Replies:** 1\
**Last updated:** [August 29, 2024, 5:49am UTC](https://forum.realdash.net/t/elm327-data-refresh-rate/6172 "2024-08-29T05:49:25Z")

</div>

I am using OBD2 connection using fake ELM327 adapter. It is quite expensive for me to buy the genuine one. My dash displays around 20 values per second. RPM, MAP and VSS each update around 4Hz. If I buy like Vlinker or …

---

## [GPIO INPUT with Negative wire.](https://forum.realdash.net/t/gpio-input-with-negative-wire/1610)

<div class="topic-metadata">

**Author:** [@dmakhkamov](https://forum.realdash.net/u/dmakhkamov)\
**Replies:** 6\
**Last updated:** [August 22, 2024, 3:41pm UTC](https://forum.realdash.net/t/gpio-input-with-negative-wire/1610 "2024-08-22T15:41:37Z")

</div>

Hi @realdashdev, I am currently digitizing the analog dashboard signals using Arduino board. Some of the analog signals in the car are switched by positive wire, while some are with negative. So I PULLUP or PULLDOWN the…

---

## [NMEA 2000 help setting up](https://forum.realdash.net/t/nmea-2000-help-setting-up/5782)

<div class="topic-metadata">

**Author:** [@757boatworks](https://forum.realdash.net/u/757boatworks)\
**Replies:** 6\
**Last updated:** [August 15, 2024, 3:39pm UTC](https://forum.realdash.net/t/nmea-2000-help-setting-up/5782 "2024-08-15T15:39:01Z")

</div>

I saw that NMEA 2000 was implemented in version 2.3.6, and then followed up in 2.3.7 with a “Fixed Issues with NMEA 2000 Connection” in the changelog. Is there somewhere I can get some more info on setting it up, and wh…

---

## [Suggestion for tablet](https://forum.realdash.net/t/suggestion-for-tablet/339)

<div class="topic-metadata">

**Author:** [@SirOlsen](https://forum.realdash.net/u/SirOlsen)\
**Replies:** 3\
**Last updated:** [August 9, 2024, 6:07am UTC](https://forum.realdash.net/t/suggestion-for-tablet/339 "2024-08-09T06:07:32Z")

</div>

Hi there I could need some advice regarding which tablet device I should go for. I have been an Apple user for many years, and pr. now has an iPad Mini 4 as I hoped to use as dashboard unit in my XC70 (more or less). T…

---

## [Instant fuel consumption](https://forum.realdash.net/t/instant-fuel-consumption/947)

<div class="topic-metadata">

**Author:** [@Mozgolom](https://forum.realdash.net/u/Mozgolom)\
**Replies:** 4\
**Last updated:** [June 27, 2024, 5:44am UTC](https://forum.realdash.net/t/instant-fuel-consumption/947 "2024-06-27T05:44:19Z")

</div>

What and where i need to configure the Realdash to calculate instant fuel consumption?

---

## [Trigger conditions](https://forum.realdash.net/t/trigger-conditions/5648)

<div class="topic-metadata">

**Author:** [@matt-c205](https://forum.realdash.net/u/matt-c205)\
**Replies:** 2\
**Last updated:** [June 27, 2024, 5:10am UTC](https://forum.realdash.net/t/trigger-conditions/5648 "2024-06-27T05:10:55Z")

</div>

Is there a way to say only trigger an action if a condition is met for a period of time rather than instantly?

---

## [Haltech trim pot “modes”](https://forum.realdash.net/t/haltech-trim-pot-modes/5496)

<div class="topic-metadata">

**Author:** [@Franks14](https://forum.realdash.net/u/Franks14)\
**Replies:** 2\
**Last updated:** [May 26, 2024, 10:34pm UTC](https://forum.realdash.net/t/haltech-trim-pot-modes/5496 "2024-05-26T22:34:02Z")

</div>

Hey everyone Is there way to program a trim pot connected to the haltech ecu to show different texts on the dash? For example position one is low boost, position two will be medium boost and position 3 high boost. ? T…

---

## [Blocking settings](https://forum.realdash.net/t/blocking-settings/5340)

<div class="topic-metadata">

**Author:** [@FlekerProF](https://forum.realdash.net/u/FlekerProF)\
**Replies:** 4\
**Last updated:** [May 3, 2024, 5:21am UTC](https://forum.realdash.net/t/blocking-settings/5340 "2024-05-03T05:21:43Z")

</div>

Is it possible to completely block the opening of the application menu and edit the skin? If so, how to do it on an Android device

---

## [Stretch realdash across multiple screens](https://forum.realdash.net/t/stretch-realdash-across-multiple-screens/5300)

<div class="topic-metadata">

**Author:** [@mb1096](https://forum.realdash.net/u/mb1096)\
**Replies:** 2\
**Last updated:** [April 30, 2024, 2:57pm UTC](https://forum.realdash.net/t/stretch-realdash-across-multiple-screens/5300 "2024-04-30T14:57:48Z")

</div>

I’ve searched all over the forum, and although I find references, can’t find specific info and insight into running single dash across two screens. I’m running Linux on RPI4. any insight or info on managing multiple s…

---

## [Reset history gauge](https://forum.realdash.net/t/reset-history-gauge/5234)

<div class="topic-metadata">

**Author:** [@matt-c205](https://forum.realdash.net/u/matt-c205)\
**Replies:** 2\
**Last updated:** [April 22, 2024, 7:44am UTC](https://forum.realdash.net/t/reset-history-gauge/5234 "2024-04-22T07:44:56Z")

</div>

Hi. Not been able to do this. I have a smaller gauge next to main RPM and Speed gauges that is set to History Mode MAX 9999. This does what i need in most cases, but i have put a “History” button on the dash and i woul…

---

## [Importing profiles of cars](https://forum.realdash.net/t/importing-profiles-of-cars/425)

<div class="topic-metadata">

**Author:** [@Sarphati](https://forum.realdash.net/u/Sarphati)\
**Replies:** 8\
**Last updated:** [April 7, 2024, 3:24pm UTC](https://forum.realdash.net/t/importing-profiles-of-cars/425 "2024-04-07T15:24:11Z")

</div>

Hello, I am new to RealDash. I see there is an Import feature for specific cars. Is there a list of car profiles that have been created already? I am searching for: MGB (1800cc) 1966 Ford Mustang (289ci) 1978 Fiat 1…

[Next page](https://forum.realdash.net/c/general/general-realdash-discussion/16.md?page=1)
