# A problem for the connections Can and XML file

**URL:** <https://forum.realdash.net/t/a-problem-for-the-connections-can-and-xml-file/6377>\
**Category:** Adapters (CAN/LIN)\
**Created:** [September 16, 2024, 12:33pm UTC](https://forum.realdash.net/t/a-problem-for-the-connections-can-and-xml-file/6377 "2024-09-16T12:33:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ledidjoux](https://forum.realdash.net/letter_avatar_proxy/v4/letter/l/34f0e0/32.png) [@ledidjoux](https://forum.realdash.net/u/ledidjoux)\
**Post date:** [September 16, 2024, 12:33pm UTC](https://forum.realdash.net/t/a-problem-for-the-connections-can-and-xml-file/6377/1 "2024-09-16T12:33:19Z")

</div>

hello, I have a connection problem with my obdlink cx adapter… I can connect in obd2 but not in can…  
in addition I would have liked to get help to make my indicators work… because nothing is displayed on the premium dashboard that I bought… I don’t understand anything about the XML file can you help me create one please ??

atd  
OK

> atz  
> atz

ELM327 v1.4b

> atl0  
> atl0  
> OK

> ate0  
> ate0  
> OK

> ats0  
> OK

> atsp1  
> OK

> atdpn  
> 1

> 0100  
> NO DATA

> 0900  
> NO DATA

> atpc  
> OK

> atsp2  
> OK

> atdpn  
> 2

> 0100  
> NO DATA

> 0900  
> NO DATA

> atpc  
> OK

> atsp3  
> OK

> atdpn  
> 3

> 0100  
> BUS INIT: …ERROR

> 0900  
> BUS INIT: …ERROR

> atpc  
> OK

> atsp4  
> OK

> atdpn  
> 4

> 0100  
> BUS INIT: …ERROR

> 0900  
> BUS INIT: …ERROR

> atpc  
> OK

> atsp5  
> OK

> atdpn  
> 5

> 0100  
> BUS INIT: ERROR

> 0900  
> BUS INIT: ERROR

> atpc  
> OK

> atsp6  
> OK

> atdpn  
> 6

> 0100  
> 4100983B0011

> 0120  
> 412080000000

> 0140  
> NO DATA

> 0160  
> NO DATA

> 0180  
> NO DATA

> 01a0  
> NO DATA

> 01c0  
> NO DATA

> 0900  
> 490054000000

> atpc  
> OK

> DETECTION COMPLETE  
> PROTOCOLE SOUTENU: 6, ISO 15765-4 CAN (11 bit ID, 5  
> 00 kbaud)  
> 0100: 0x983B0011  
> PIDS SUPPORTÉ (HEX)  
> 01: Monitor status since DTCs cleared. (Includes ma  
> lfunction indicator lamp (MIL) status and number of  
> DTCs.)  
> 04: Calculated engine load  
> 05: Engine coolant temperature  
> 0B: Intake manifold absolute pressure  
> 0C: Engine RPM  
> 0D: Vehicle speed  
> 0F: Intake air temperature  
> 10: MAF air flow rate  
> 1C: OBD standards this vehicle conforms to  
> 20: PIDs supported [21 - 40]  
> 0120: 0x80000000  
> PIDS SUPPORTÉ (HEX)  
> 21: Distance traveled with malfunction indicator la  
> mp (MIL) on  
> Thanks you 🙏🤞

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [September 20, 2024, 6:10am UTC](https://forum.realdash.net/t/a-problem-for-the-connections-can-and-xml-file/6377/2 "2024-09-20T06:10:09Z")

</div>

You are talking about CAN connection, but your post contain only OBD2 connection info.

Asking to help to create CAN connection without knowing vehicle year, make, model, hardware modifications, etc will not give you a lot of answers. Mixing your question with output from OBD2 will just confuse even more.

I’d recommend that you find a friend or colleague who can spend some time with you and your vehicle to get started.