# Beginner questions

**URL:** <https://forum.realdash.net/t/beginner-questions/4866>\
**Category:** General RealDash discussion\
**Created:** [March 3, 2024, 8:05pm UTC](https://forum.realdash.net/t/beginner-questions/4866 "2024-03-03T20:05:54Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![berre](https://forum.realdash.net/letter_avatar_proxy/v4/letter/b/e36b37/32.png) [@berre](https://forum.realdash.net/u/berre)\
**Post date:** [March 6, 2024, 3:24pm UTC](https://forum.realdash.net/t/beginner-questions/4866/4 "2024-03-06T15:24:49Z")

</div>

So, I checked out the shell, I had no idea it would request the available pids after setting up the connection, that’s quite convenient. I took a picture of the output.

No luck for the fuel level though, it’s not supported over OBD2.

I’ve been reading quite a lot and if I’m not mistaken the protocol used by the Passat 3B5 is ‘KWP-1281’, a proprietary VW one. Will this cause problems? Do I need a specific adapter for it?

The Ross-Tech software is apparently still popular for VAG cars, and OBDEleven seems to be the new kid on the block. If I understand things correctly, they are mainly interesting if you want to change things, e.g. enable/disable certain features?

 ![20240305_215637](https://forum.realdash.net/uploads/default/original/2X/c/cc8dc3aa03ff324834537f9290617b85d794c46f.jpeg)

---

_[View the full topic](https://forum.realdash.net/t/beginner-questions/4866)._
