# DTA T series help

**URL:** <https://forum.realdash.net/t/dta-t-series-help/1391>\
**Category:** Generic Design Discussion\
**Created:** [August 19, 2022, 9:46pm UTC](https://forum.realdash.net/t/dta-t-series-help/1391 "2022-08-19T21:46:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Matt](https://forum.realdash.net/letter_avatar_proxy/v4/letter/m/a6a055/32.png) [@Matt](https://forum.realdash.net/u/Matt)\
**Post date:** [August 19, 2022, 9:46pm UTC](https://forum.realdash.net/t/dta-t-series-help/1391/1 "2022-08-19T21:46:47Z")

</div>

Hi I’m hoping someone can give me a little info so I can try and write an XML file for the T series ECU which is canbus so going to run thru a can analyser.  
In the DTA info they list all the Can IDs but not exactly sure how to write the XML 🙈  
So an example Can ID from them is  
0x2000, pos 0 , bytes2, offset 0, RPM.  
Only the pos changes (0,2,4,6) offset stays the same for each RPM afr map etc  
Could someone show me how that rpm line would be written for the XML file then I can hopefully sort the rest out . Obviously I’m new to all this but keen to get a grip of it before the ECU arrives , any help would be great ,thanks 👍

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [August 22, 2022, 7:30am UTC](https://forum.realdash.net/t/dta-t-series-help/1391/2 "2022-08-22T07:30:55Z")

</div>

Link me the DTA T series CAN info and I will take a look.

---

<div class="post-metadata">

**Author:** ![Matt](https://forum.realdash.net/letter_avatar_proxy/v4/letter/m/a6a055/32.png) [@Matt](https://forum.realdash.net/u/Matt)\
**Post date:** [August 23, 2022, 12:51pm UTC](https://forum.realdash.net/t/dta-t-series-help/1391/3 "2022-08-23T12:51:57Z")

</div>

Hi, thanks for the response, the info is in the T series pdf manual which i got from here [https://www.dtafast.co.uk/downloads/](https://www.dtafast.co.uk/downloads/)  
The info is on page 29 of the pdf . Thanks for taking a look, it will give me a real head start if I can get confirmation that the XML is written ok

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [August 24, 2022, 8:15am UTC](https://forum.realdash.net/t/dta-t-series-help/1391/4 "2022-08-24T08:15:56Z")

</div>

Try this XML file. It does not have everything yet but should be enough to see if frames are interpreted correctly  
[dtafast\_tseries.xml](https://forum.realdash.net/uploads/short-url/fcAmKt4PKR5eo8hukXPa6bKiB8b.xml) (1.69 KB)

---

<div class="post-metadata">

**Author:** ![Matt](https://forum.realdash.net/letter_avatar_proxy/v4/letter/m/a6a055/32.png) [@Matt](https://forum.realdash.net/u/Matt)\
**Post date:** [August 24, 2022, 11:34pm UTC](https://forum.realdash.net/t/dta-t-series-help/1391/5 "2022-08-24T23:34:07Z")

</div>

Oh wow that’s brilliant, thank you, that was a few more lines filled out than I expected !!, I’m glad to see I was on the right track with what I had already written . As soon as the ECU arrives I will give it a go and let you know how I get on, it should be here early next week. Thanks again 👍