# ELM327 ATMA results

**URL:** <https://forum.realdash.net/t/elm327-atma-results/6193>\
**Category:** OBD2\
**Created:** [August 30, 2024, 3:39am UTC](https://forum.realdash.net/t/elm327-atma-results/6193 "2024-08-30T03:39:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joshua1988](https://forum.realdash.net/letter_avatar_proxy/v4/letter/j/90ced4/32.png) [@Joshua1988](https://forum.realdash.net/u/Joshua1988)\
**Post date:** [August 30, 2024, 3:39am UTC](https://forum.realdash.net/t/elm327-atma-results/6193/1 "2024-08-30T03:39:15Z")

</div>

> atma  
> atma  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 0644551000000000000  
> 50000

From OBD Monitor. This is the result in ATMA mode.  
The ECU is from Bosch. Protocol is ISO 15765-4 CAN 11 bit 500kbaud.  
It seems there is no useful data. Can someone help me on this?

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [September 2, 2024, 11:04am UTC](https://forum.realdash.net/t/elm327-atma-results/6193/2 "2024-09-02T11:04:16Z")

</div>

Some ECUs require to set a specific header with ATSH in order to access the data. These are ECU specific, so cannot say if that is the case with yours-