# ESP32 Support

**URL:** <https://forum.realdash.net/t/esp32-support/319>\
**Category:** Feature requests\
**Created:** [January 28, 2020, 8:41pm UTC](https://forum.realdash.net/t/esp32-support/319 "2020-01-28T20:41:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CoTECH](https://forum.realdash.net/user_avatar/forum.realdash.net/cotech/32/8_2.png) [@CoTECH](https://forum.realdash.net/u/CoTECH)\
**Post date:** [January 28, 2020, 8:41pm UTC](https://forum.realdash.net/t/esp32-support/319/1 "2020-01-28T20:41:28Z")

</div>

The fact is that an 8-bit arduino is no longer enough for some tasks related to the CAN bus. I am in favor of adding a RealDash ESP 32 controller! If anything, then I’m ready to test …

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 30, 2020, 6:02am UTC](https://forum.realdash.net/t/esp32-support/319/2 "2020-01-30T06:02:56Z")

</div>

Basically it does not matter what kind of a microcontoller you use for IO systems, you can use the same -RealDash CAN’ protocol to communicate between your device and RealDash.