# Gear position indicator with DashBox **URL:** \ **Category:** SPLeinonen\ **Created:** [March 8, 2025, 2:21am UTC](https://forum.realdash.net/t/gear-position-indicator-with-dashbox/7748 "2025-03-08T02:21:35Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![patracy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/p/9de053/32.png) [@patracy](https://forum.realdash.net/u/patracy)\ **Post date:** [March 8, 2025, 2:21am UTC](https://forum.realdash.net/t/gear-position-indicator-with-dashbox/7748/1 "2025-03-08T02:21:35Z")
Has anyone developed a gear position indicator with the dashbox? I know for the holley dashes, the ticket is to take a suspension ride height sensor and create a indicator that triggers off voltage. I assume the same could be done here? ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [March 10, 2025, 6:43am UTC](https://forum.realdash.net/t/gear-position-indicator-with-dashbox/7748/2 "2025-03-10T06:43:06Z")
To my understanding, SPLeinonen DashBox has some analog inputs, so it should be possible. I recommend that you contact SPLeinonen directly for wiring/hardware instructions. ---
**Author:** ![patracy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/p/9de053/32.png) [@patracy](https://forum.realdash.net/u/patracy)\ **Post date:** [May 7, 2025, 12:59pm UTC](https://forum.realdash.net/t/gear-position-indicator-with-dashbox/7748/3 "2025-05-07T12:59:58Z")
I never updated this. For anyone that is interested. I used a suspension height sensor. (0-5v pot basically) I simply mounted it to a spare boss on the side of my transmission and made a link to connect it’s arm to the shifter linkage. I added the sensor in Dashbox and used a moving dot to indicate the gear based on voltage. Then simply placed a text gauge with PRND321 below it.