# Indicators etc - stupid questions

**URL:** <https://forum.realdash.net/t/indicators-etc-stupid-questions/1286>\
**Category:** Custom Hardware / Electronics\
**Created:** [May 3, 2022, 9:04am UTC](https://forum.realdash.net/t/indicators-etc-stupid-questions/1286 "2022-05-03T09:04:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tbj](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/8dc957/32.png) [@Tbj](https://forum.realdash.net/u/Tbj)\
**Post date:** [May 3, 2022, 9:04am UTC](https://forum.realdash.net/t/indicators-etc-stupid-questions/1286/1 "2022-05-03T09:04:49Z")

</div>

Hi all

I am currently communicating with my stock ECU using an ELM327 bluetooth dongle. I now need to get indicators and fuel gauge etc.

I have found the realdashextras github and am pretty sure I can handle the electronics side of it using an arduino. Question is - do I need to inject the signals into the canbus or can I have two connections active at once? So for instance could I connect the arduino via serial and read the indicators/fuel gauge/lights status from that whilst still reading the rest of the info from the ECU via bluetooth?

I do have a CAN transceiver module I bought in case I need to inject the signals into the CAN.

I’ve done a lot of car electronics before but never anything quite like this so apologies for the very basic question but I just wanted to know what angle I should approach it from.

---

<div class="post-metadata">

**Author:** ![orbyog](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/df788c/32.png) [@orbyog](https://forum.realdash.net/u/orbyog)\
**Post date:** [May 3, 2022, 9:41am UTC](https://forum.realdash.net/t/indicators-etc-stupid-questions/1286/2 "2022-05-03T09:41:42Z")

</div>

You can use multiple connections, add them in the garage connections list.

---

<div class="post-metadata">

**Author:** ![Tbj](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/8dc957/32.png) [@Tbj](https://forum.realdash.net/u/Tbj)\
**Post date:** [May 3, 2022, 4:53pm UTC](https://forum.realdash.net/t/indicators-etc-stupid-questions/1286/3 "2022-05-03T16:53:45Z")

</div>

Thank you.

I am actually considering reading the OBD2 data from k-line using arduino too and sending it via serial - I think it will be faster than using the Bluetooth ELM module.

Just found out my car uses k line and not CAN so looks like the CAN modules were a waste of money, oh well!
