# Input mapping ms3

**URL:** <https://forum.realdash.net/t/input-mapping-ms3/7412>\
**Category:** General\
**Created:** [January 26, 2025, 8:06am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412 "2025-01-26T08:06:01Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 26, 2025, 8:06am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/1 "2025-01-26T08:06:01Z")

</div>

I am trying to get oil pressure working using realdash on android  
I go to settings then units and values, add, then i select engine/ecu inputs and select engine oil pressure, then select source input engine/ecu/ engine oil pressure, then nothing happens and the new input is not listed, I must be doing something wrong ?

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 27, 2025, 6:28am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/2 "2025-01-27T06:28:46Z")

</div>

From where is your engine oil pressure coming into RealDash?

---

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 27, 2025, 6:42am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/3 "2025-01-27T06:42:12Z")

</div>

All data coming over from the ms3x over fdti Bluetooth connection, when I use tunerstudo via the same connection all the data is there, so I assume this is what you mean?  
Thanks

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 27, 2025, 7:52am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/4 "2025-01-27T07:52:05Z")

</div>

Yes. While engine running, try debug data view to see if RealDash is actually receiving your engine oil pressure:

- Settings-\>Application-\>Debug-\>Debug Data View.

---

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 27, 2025, 8:30am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/5 "2025-01-27T08:30:33Z")

</div>

Awesome, so I found the data under custom, it’s sensor01, so I configured engine oil pressure to that, now it displays the max value 145 even though the sensor is around 58? How do I fix that  
Thanks

 ![Screenshot_20250127-192601](https://forum.realdash.net/uploads/default/original/2X/d/d307785c97b5808cc569bf41a2e2141912f94d8b.png)

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 27, 2025, 8:42am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/6 "2025-01-27T08:42:16Z")

</div>

> [@ttxpc](#):
>
> How do I fix that

This could be a units conversion. Go to ‘Settings-\>Units & Values’ and change the pressure units.

---

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 27, 2025, 8:54am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/7 "2025-01-27T08:54:16Z")

</div>

Ok thank, Pressure/weight units is set to psi/lbs, sensor01 output is in psi already though?  
Thanks

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 27, 2025, 12:15pm UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/8 "2025-01-27T12:15:43Z")

</div>

It could be that megasquirt ini file does not specify units for the sensor01 value. If units is not specified RealDash expects the incoming pressure value to be in BAR.

---

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 27, 2025, 11:33pm UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/9 "2025-01-27T23:33:41Z")

</div>

That makes sense, what’s the syntax to use gauge math to correct this?  
Thanks

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [January 28, 2025, 6:55am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/10 "2025-01-28T06:55:23Z")

</div>

It would be:

```auto
V*0.06894757

```

---

<div class="post-metadata">

**Author:** ![ttxpc](https://forum.realdash.net/letter_avatar_proxy/v4/letter/t/edb3f5/32.png) [@ttxpc](https://forum.realdash.net/u/ttxpc)\
**Post date:** [January 28, 2025, 9:15am UTC](https://forum.realdash.net/t/input-mapping-ms3/7412/11 "2025-01-28T09:15:46Z")

</div>

Works great now, thanks
