# Maxxecu mini and Lenovo M9

**URL:** <https://forum.realdash.net/t/maxxecu-mini-and-lenovo-m9/8712>\
**Category:** MaxxECU\
**Created:** [August 3, 2025, 5:32pm UTC](https://forum.realdash.net/t/maxxecu-mini-and-lenovo-m9/8712 "2025-08-03T17:32:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KillTheRat](https://forum.realdash.net/letter_avatar_proxy/v4/letter/k/85f322/32.png) [@KillTheRat](https://forum.realdash.net/u/KillTheRat)\
**Post date:** [August 3, 2025, 5:32pm UTC](https://forum.realdash.net/t/maxxecu-mini-and-lenovo-m9/8712/1 "2025-08-03T17:32:01Z")

</div>

Hi there, have tried to find an answer but with no luck.  
I have a mini that I would like to connect to my Lenovo M9 via usb otg but it just says it try to connect. It opens Rd automaticly when I put the USB cable in so Rd can feel the ecu. It works fine with my phone One+ Nordic 2T but I feel that it will be to small screen and I need it cabled to the helmet.  
My 2T have android version 14 the M8 I don’t know as now.

I have been looking at can-usb adapters but are those PnP?

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [August 5, 2025, 12:29pm UTC](https://forum.realdash.net/t/maxxecu-mini-and-lenovo-m9/8712/2 "2025-08-05T12:29:47Z")

</div>

> [@KillTheRat](#):
>
> I have been looking at can-usb adapters but are those PnP?

I would recommend that you use CAN connection instead of direct USB. MaxxECU CAN connection is well tested and fully functional.