# ME442 oil temperature **URL:** \ **Category:** Motorsport Electronics\ **Created:** [May 8, 2024, 1:46pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389 "2024-05-08T13:46:57Z")\ **Posts on this page:** 10\ **Page:** 3
**Author:** ![Philip5660](https://forum.realdash.net/letter_avatar_proxy/v4/letter/p/839c29/32.png) [@Philip5660](https://forum.realdash.net/u/Philip5660)\ **Post date:** [January 27, 2026, 12:15pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/41 "2026-01-27T12:15:29Z")
Yes that seems within the range of an expected value as this is just the pressure the pump primes and the engine is off. ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [January 27, 2026, 12:28pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/42 "2026-01-27T12:28:39Z")
I think I got it, prerel9 in Dropbox. ---
**Author:** ![Philip5660](https://forum.realdash.net/letter_avatar_proxy/v4/letter/p/839c29/32.png) [@Philip5660](https://forum.realdash.net/u/Philip5660)\ **Post date:** [January 27, 2026, 12:46pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/43 "2026-01-27T12:46:38Z")
Brilliant! Based on priming the pump and running at idle I’m seeing what I interpret as expected values in PSI - Amazing work again thanks so much!! ---
**Author:** ![Ezegymailcim](https://forum.realdash.net/letter_avatar_proxy/v4/letter/e/9dc877/32.png) [@Ezegymailcim](https://forum.realdash.net/u/Ezegymailcim)\ **Post date:** [April 17, 2026, 10:30am UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/44 "2026-04-17T10:30:12Z")
Hey, this topic was superexciting for me as I am running basically the same setup /MX5 2002 1.8VVT + turbo + ME442/ and would be really happy to add oil temp to my display. Did the solution get implemented into version available from playstore please? Or have access to the above mentioned test version please? Thanks a lot… ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [April 20, 2026, 7:07am UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/45 "2026-04-20T07:07:32Z")
This fix should be in current public version of RealDash. ---
**Author:** ![dan.andrei.enescu](https://forum.realdash.net/letter_avatar_proxy/v4/letter/d/3ab097/32.png) [@dan.andrei.enescu](https://forum.realdash.net/u/dan.andrei.enescu)\ **Post date:** [May 3, 2026, 12:48pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/46 "2026-05-03T12:48:00Z")
@realdashdev @Philip5660 This is amaizing news. I have installed the latest version from playstore and Oil Temp and Fuel Pressure works fine. The only thing that is still not working is Oil pressure. In the past Oil pressure from ecu was not showing anything, but now it just replicates the Oil Pressure simulated/estimated. The gauge itself works but it is not the real pressure, it doesn’t match the value in MEITE. Gauge works even if I unplug the sensor. ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [May 4, 2026, 7:04am UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/47 "2026-05-04T07:04:34Z")
Check your input mapping at ‘Settings-\>Units & Values-\>Input Mapping’ ---
**Author:** ![Ezegymailcim](https://forum.realdash.net/letter_avatar_proxy/v4/letter/e/9dc877/32.png) [@Ezegymailcim](https://forum.realdash.net/u/Ezegymailcim)\ **Post date:** [June 13, 2026, 8:30pm UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/48 "2026-06-13T20:30:11Z")
Hey all, I am having also an issue with oil pressure display: in Meite the pressure value is visible (in Psi) but the RealDash display keep showing 0 only. If I understand correctly, the datastream ID should be 31?! Is it? Thanks for any ideas 🙂 ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [June 17, 2026, 7:58am UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/49 "2026-06-17T07:58:07Z")
Have you checked the debug data view, if you can find correct oil pressure value there? Settings-\>Application-\>Debug-\>Debug Data View ---
**Author:** ![Ezegymailcim](https://forum.realdash.net/letter_avatar_proxy/v4/letter/e/9dc877/32.png) [@Ezegymailcim](https://forum.realdash.net/u/Ezegymailcim)\ **Post date:** [October 7, 2026, 8:56am UTC](https://forum.realdash.net/t/me442-oil-temperature/5389/50 "2026-10-07T08:56:31Z")
Hey, picking up this again. Yeah, I checked the data view, but I can only see the oil temperature data, not pressure - see attached screenshots. Attached also a screenshot from the MEITE, with the live data chanels used. I hope it helps… ![43](https://forum.realdash.net/uploads/default/original/2X/4/4871a8113f042bcdd1f7f190453b99f567ba871c.png) ![47](https://forum.realdash.net/uploads/default/original/2X/7/76ea4824d06c6e3113ab7edd6489dea112e7c993.png) ![46](https://forum.realdash.net/uploads/default/original/2X/e/e653bc56aa60c6cb0efd4465d0e75eb0584f17c7.png) [Previous page](https://forum.realdash.net/t/me442-oil-temperature/5389.md?page=2)