# Question about multiple instances on singular Raspberry Pi 4 b

**URL:** <https://forum.realdash.net/t/question-about-multiple-instances-on-singular-raspberry-pi-4-b/4991>\
**Category:** General RealDash discussion\
**Created:** [March 19, 2024, 3:29pm UTC](https://forum.realdash.net/t/question-about-multiple-instances-on-singular-raspberry-pi-4-b/4991 "2024-03-19T15:29:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rylanemmanuel](https://forum.realdash.net/letter_avatar_proxy/v4/letter/r/cc9497/32.png) [@rylanemmanuel](https://forum.realdash.net/u/rylanemmanuel)\
**Post date:** [March 19, 2024, 3:29pm UTC](https://forum.realdash.net/t/question-about-multiple-instances-on-singular-raspberry-pi-4-b/4991/1 "2024-03-19T15:29:11Z")

</div>

Good day,  
I’m interested in retrofitting an older style instrument cluster with two circular OLED displays connectors to a Raspberry Pi 4 Model B.

My question is to figure out if it’s possible to display two different set of realdash applications for different screens.

I read through wiki ([RealDash | Manuals | Data Multicast](https://realdash.net/manuals/datamulticast.php)) and I’m aware of multicast. What I’m trying to confirm is that via multicast I would be able to use my singular CAN to USB device and then display two screens completely separate of each other.

Sorry for the possible waste of a post, just trying to get clarification and confirmation that this is in fact the function of multicast.

Best Regards.

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [March 21, 2024, 12:36pm UTC](https://forum.realdash.net/t/question-about-multiple-instances-on-singular-raspberry-pi-4-b/4991/2 "2024-03-21T12:36:54Z")

</div>

If you are running two RPis I think best option would be to use two CAN-USB adapters (one each RPi) and run them 100% independently.

As RPi4 has dual HDMI output, you could also run only one RPi and extend the desktop to your dual circular screens.

All-in-all, I don’t think you need multicasting in this case, unless another instance has access to data that other has not.
