# Real dash project for non ecu **URL:** \ **Category:** General\ **Created:** [July 11, 2024, 3:17pm UTC](https://forum.realdash.net/t/real-dash-project-for-non-ecu/5805 "2024-07-11T15:17:18Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![younishadidi](https://forum.realdash.net/letter_avatar_proxy/v4/letter/y/6bbea6/32.png) [@younishadidi](https://forum.realdash.net/u/younishadidi)\ **Post date:** [July 11, 2024, 3:17pm UTC](https://forum.realdash.net/t/real-dash-project-for-non-ecu/5805/1 "2024-07-11T15:17:18Z")
Hello all I have a non ecu car . I use Arduino nano to collect data from car and send it to rp4 . For left and right blinker iuse to read digital input for pin 1 and send it to real dash . Can any one give me the right xml file for this ---
**Author:** ![mmain](https://forum.realdash.net/user_avatar/forum.realdash.net/mmain/32/651_2.png) [@mmain](https://forum.realdash.net/u/mmain)\ **Post date:** [July 12, 2024, 2:22am UTC](https://forum.realdash.net/t/real-dash-project-for-non-ecu/5805/2 "2024-07-12T02:22:40Z")
You have both left and right turn signals going to a single digital input? The xml for this will be determined by how you have included the digital input in the arduino code ---
**Author:** ![younishadidi](https://forum.realdash.net/letter_avatar_proxy/v4/letter/y/6bbea6/32.png) [@younishadidi](https://forum.realdash.net/u/younishadidi)\ **Post date:** [July 12, 2024, 6:58am UTC](https://forum.realdash.net/t/real-dash-project-for-non-ecu/5805/3 "2024-07-12T06:58:51Z")
Left for pin 1 and right for pin 2 ---
**Author:** ![mmain](https://forum.realdash.net/user_avatar/forum.realdash.net/mmain/32/651_2.png) [@mmain](https://forum.realdash.net/u/mmain)\ **Post date:** [July 12, 2024, 7:15am UTC](https://forum.realdash.net/t/real-dash-project-for-non-ecu/5805/4 "2024-07-12T07:15:30Z")
I don’t know what these pins corresponds to on your Arduino GPIO. If you send me the code you are using to build and send the CAN frame, I can send you the xml code needed to decode