# Renault Clio RS 200 Pyren export **URL:** \ **Category:** Help, tips and tricks\ **Created:** [November 8, 2021, 8:37pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096 "2021-11-08T20:37:40Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [November 8, 2021, 8:37pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/1 "2021-11-08T20:37:40Z")
Hello Team, I have scanned my car using the pyren software, This has allowed me to find out the mode / pid for each data set for the dash E.G indicators. But I don’t understand the structure. I understand Hexadecimal and binary formats but i maybe missing some information. For example 1: Battery voltage 12v, Mode&PID: 2112, equation (X \* 256 + Y)/1000.0, Header 743. Example 2: Parking brake, mode&PID: 2110, {A:7} header 743. Thank you in advance. Andy ---
**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\ **Post date:** [November 9, 2021, 12:31pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/2 "2021-11-09T12:31:54Z")
I think its best that you start by experimenting with RealDash OBD2 Monitor, which is in connection settings. There you can just type the OBD2 commands and see what is the reply from your vehicle. ATSH command is used to set the header, and then you can request the PID. For example: ```plaintext ATSH743 2112 ``` And check what are the responses from your car. ---
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [June 20, 2022, 8:13pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/3 "2022-06-20T20:13:48Z")
Hello, apologies for not replying had troubles with my car finally got around to do what you said… and i got the following responses: so im looking for LEFT INDICATOR REQUEST PID 2111 Equation {D:7} i sent 2111 PID and i got the followling back 61112110010004C14411001100D001 these are all the available Equations for that PID {A:1} {A:2} {A:3} {A:4} {A:5} {A:6} {A:7} {B:1} {B:2} {B:3} {B:5} {B:6} {B:7} {C:0} {C:1} {C:2} {C:3} {C:4} {C:5} {C:6} {C:7} {D:5} {D:6} {D:7} {E:2} {F:0} {F:1} {G:0} {G:1} {G:2} {G:3} {H:0} {H:2} {H:3} {H:4} {H:5} {H:6} {H:7} {I:1} {I:2} {I:4} {I:5} {I:6} {I:7} {J:0} {J:1} {J:2} {J:3} {J:4} {J:7} {K:6} {K:7} {M:0} {M:1} {M:2} ---
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [June 21, 2022, 3:56pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/4 "2022-06-21T15:56:04Z")
I get this Apologies ![Screenshot_20220621-164827.png](https://forum.realdash.net/uploads/default/original/1X/292a08c819ab704f2b43e60385f1bc93007d9739.png) ---
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [June 23, 2022, 3:03pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/5 "2022-06-23T15:03:20Z")
There are two CAnbus lines on the Reanult OBD2 port. I have access to two obdllink tools: - oblink mx+ - oblink EX I’m assuming that all standard applications will communicate with the “UCH gateway” for its PID via pins 12 and 13. Or am I correct in thinking that it will use both canbus lines depending on how commands are sent down both lines? I’d like to sniff the traffic now that I know the Dash CanBus is on Pins 6 and 14. Can I sniff the traffic with these tools, and if so, what software should I use? Or do I need more specialised tools and/or a Linux operating system? ![Canbus Wiring.png](https://forum.realdash.net/uploads/default/original/1X/426eef817197a8d9e4076971f6fd5ef366d18c3a.png) ---
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [June 23, 2022, 3:22pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/6 "2022-06-23T15:22:50Z")
After arranging all of the letters, it appears that there is a pattern. ID - Bits? 7 63 03 7f 21 80 00000111 00111111 00000011 0011 0111 1111 0010 0001 1000 0000 AAAAAAA BBBBBBB CCCCCCC DDD E FF GGGG HHHHHHH IIIIIII JJJJJJJ KK MMM 8bit 8 bits 8 bits 3bits 1bit 2bits 4 bits 8 bits 8 bits 8 bits 2 bits 3 bits 63bits in total 8bytes how would you read that? from right going left? > [@](#): > > Hello, > > apologies for not replying had troubles with my car > > finally got around to do what you said… and i got the following responses: > > so im looking for LEFT INDICATOR REQUEST PID 2111 Equation {D:7} > > i sent 2111 PID and i got the followling back > > 61112110010004C14411001100D001 > > these are all the available Equations for that PID > > {A:1} > {A:2} > {A:3} > {A:4} > {A:5} > {A:6} > {A:7} > {B:1} > {B:2} > {B:3} > {B:5} > {B:6} > {B:7} > {C:0} > {C:1} > {C:2} > {C:3} > {C:4} > {C:5} > {C:6} > {C:7} > {D:5} > {D:6} > {D:7} > {E:2} > {F:0} > {F:1} > {G:0} > {G:1} > {G:2} > {G:3} > {H:0} > {H:2} > {H:3} > {H:4} > {H:5} > {H:6} > {H:7} > {I:1} > {I:2} > {I:4} > {I:5} > {I:6} > {I:7} > {J:0} > {J:1} > {J:2} > {J:3} > {J:4} > {J:7} > {K:6} > {K:7} > {M:0} > {M:1} > {M:2} ---
**Author:** ![oioiandy](https://forum.realdash.net/letter_avatar_proxy/v4/letter/o/8dc957/32.png) [@oioiandy](https://forum.realdash.net/u/oioiandy)\ **Post date:** [June 23, 2022, 3:52pm UTC](https://forum.realdash.net/t/renault-clio-rs-200-pyren-export/1096/7 "2022-06-23T15:52:43Z")
so we have diagnostic socket canL mulimedia signal and instrument panel Can ![Screenshot 2022-06-23 165202.png](https://forum.realdash.net/uploads/default/original/1X/665c4edd008b352c7c9cd985c0d2d4d165b8ddd1.png)