# Triggers do not send button actions

**URL:** <https://forum.realdash.net/t/triggers-do-not-send-button-actions/229>\
**Category:** Bugs and troubleshooting\
**Created:** [November 8, 2019, 4:55am UTC](https://forum.realdash.net/t/triggers-do-not-send-button-actions/229 "2019-11-08T04:55:40Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![KGTM](https://forum.realdash.net/letter_avatar_proxy/v4/letter/k/977dab/32.png) [@KGTM](https://forum.realdash.net/u/KGTM)\
**Post date:** [November 8, 2019, 4:55am UTC](https://forum.realdash.net/t/triggers-do-not-send-button-actions/229/1 "2019-11-08T04:55:40Z")

</div>

Hi Yani,

it look like the tiggers will not act on action that will send data out in readlCan mode.

like using a triggers to turn Hazard lights on, this should work same as if the button function.

Mostafa

---

<div class="post-metadata">

**Author:** ![KGTM](https://forum.realdash.net/letter_avatar_proxy/v4/letter/k/977dab/32.png) [@KGTM](https://forum.realdash.net/u/KGTM)\
**Post date:** [November 14, 2019, 8:43pm UTC](https://forum.realdash.net/t/triggers-do-not-send-button-actions/229/2 "2019-11-14T20:43:21Z")

</div>

Any update on this?

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [November 15, 2019, 1:09pm UTC](https://forum.realdash.net/t/triggers-do-not-send-button-actions/229/3 "2019-11-15T13:09:58Z")

</div>

I’m unable to reproduce this. CAN write values seem to go thru same trigger checks as all the rest.

---

<div class="post-metadata">

**Author:** ![KGTM](https://forum.realdash.net/letter_avatar_proxy/v4/letter/k/977dab/32.png) [@KGTM](https://forum.realdash.net/u/KGTM)\
**Post date:** [November 19, 2019, 2:43am UTC](https://forum.realdash.net/t/triggers-do-not-send-button-actions/229/4 "2019-11-19T02:43:37Z")

</div>

I will check again,

Action I have is button press and the button is set to Hold mode, so should send 1 when first triggered and once release should send a 0. did you test this type of button?

Thanks much.