# What protocol RealDash supports for Corvete M11 ECU

**URL:** <https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785>\
**Category:** Connectivity\
**Created:** [February 22, 2024, 4:10pm UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785 "2024-02-22T16:10:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![dobrik1990](https://forum.realdash.net/letter_avatar_proxy/v4/letter/d/b5ac83/32.png) [@dobrik1990](https://forum.realdash.net/u/dobrik1990)\
**Post date:** [February 22, 2024, 4:10pm UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785/1 "2024-02-22T16:10:50Z")

</div>

Hello everyone! I have installed ECU Корвет М11 [М11 «Корвет»](https://abit.spb.ru/ice-control/benzinovye-i-gazovye-bloki-upravleniya/m11-korvet/) on my car. This ECU supports these CAN protocols to data exchange.  
CCP  
EFI Euro 1/96  
C4  
C2  
ADLM  
J1939  
NOx VDO  
KWPonCan  
ADLMx  
Clio3 RS  
ADLMx7  
Haltech/IQ3  
VR4x+  
X-Series UEGO  
Vesta

What kind of protocol can I use in RealDash to connect throught bluetooth or wirely?  
In addition I have some extra sensors like oil preassure, oil temperature, Wideband, air temperature. I need to have this data on my dashboard.

Thant in advance for your advices.

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [February 26, 2024, 5:45am UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785/2 "2024-02-26T05:45:27Z")

</div>

From the listed, Haltech seems to be only one that RealDash has a built-in description file.

---

<div class="post-metadata">

**Author:** ![dobrik1990](https://forum.realdash.net/letter_avatar_proxy/v4/letter/d/b5ac83/32.png) [@dobrik1990](https://forum.realdash.net/u/dobrik1990)\
**Post date:** [February 26, 2024, 7:36am UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785/3 "2024-02-26T07:36:50Z")

</div>

Thanks for your answer! I have an idea to use esp32 and mpc 2515 can module to retranslate CAN packets from ECU haltech CAN protocol to realdash using your XML. Don’t you have an experience or ino files that do that? Or probably you know what issues I can face?

---

<div class="post-metadata">

**Author:** ![realdashdev](https://forum.realdash.net/user_avatar/forum.realdash.net/realdashdev/32/6_2.png) [@realdashdev](https://forum.realdash.net/u/realdashdev)\
**Post date:** [February 26, 2024, 10:27am UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785/4 "2024-02-26T10:27:07Z")

</div>

I don’t think there is any need for that if your ECU outputs Haltech compatible CAN messages. Just buy a RealDash compatible CAN adapter and connect directly.

[RealDash | Manuals | Supported CAN/LIN Adapters](https://realdash.net/manuals/supported_can_lin_analyzers.php)

---

<div class="post-metadata">

**Author:** ![dobrik1990](https://forum.realdash.net/letter_avatar_proxy/v4/letter/d/b5ac83/32.png) [@dobrik1990](https://forum.realdash.net/u/dobrik1990)\
**Post date:** [February 26, 2024, 11:19am UTC](https://forum.realdash.net/t/what-protocol-realdash-supports-for-corvete-m11-ecu/4785/5 "2024-02-26T11:19:23Z")

</div>

Thank you! I will try