Is AFR Target 1 data linked to Lambda Target 1?

[ROB-80E]

Thanks Jani, I’ll check out what fuel I have set in Garage.

I’m still a but confused as to where the serial data is coming from though. Lambda nor Lamda Target is not listed on the serial datastream from Link for the G4+.

This is a post from another thread in the Link forum:

@realdashdev

Indeed, the documentation we got from Link years back, and the information in PCLink app help file differ on some points:

Here are the differences and how RealDash currently interprets the data stream. Differences are the same on short and long data stream:
Byte 25-26: Digital input 1-12 status
Byte 27-28: Wastegate duty cycle
Byte 43: Percentage fuel cut
Byte 44: Percentage ignition cut
Byte 81-82: AFR target
Byte 83-84: Lambda
Byte 85-86: Boost target
Byte 87-88: timer1
Byte 89-90: timer2
Byte 91: Differential fuel pressure
Byte 92: Altitude

The above turned out to be the G4 datastream.

Is it possible that within RD the old AFR target (and possibly lambda) is still picking up bites 81-82 which is now DI 1 in the G4+?

Thanks,
Rob.