good morning everybody
There is a possibility to link the Proteus simulator to the functions in RealDash as if it were an Arduino board on the bench but using Proteus for this, like when pressing a button inside Proteus, the functions are sent from Proteus to RealDash via USB cable since Proteus can create virtual COM ports
I’m not familiar of what ‘Proteus’ is, but if it is a device that is capable of sending/receiving data, you can use our ‘RealDash CAN’ protocol to communicate with virtually any device. See RealDash CAN protocol specs here:
RealDash-extras/RealDash-CAN/realdash-can-protocol.md at master · janimm/RealDash-extras
