RealDash with USB problem

Connectivity MaxxECU
1

Hi,

Bought Lenovo Tab M8 tablet and usb OTG cable (this https://m.motonet.fi/fi/tuote/476598/OTG-kaapeli-USB-A-uros---MicroUSB-naaras) for Maxxecu Street, but it only shows connecting Maxxecu on the bottom right corner.
I have made the connection from Garage and from settings made sure Simulation is not selected.
What could be the issue?
I have not tried to connect anything other with the cable to the tablet, but some forum post said that this cable should work and I have understood that all current Android tablets have support for OTG? Hope this one too.

Thanks for the help!

2

That cable should work just fine. Could you send me a debug log for analysis:
http://realdash.net/forum/viewtopic.php?f=3&t=7&sid=d4e2703aed6ac074ebb96007a1dea74f

3

Just to inform also from here that I sent you the log yesterday. I did also inform by e-mail.
And no rush with this, when you have time!