When the car is at 1000 rpm, in race mode the RPM segment value is not accurate, about 1500rpm to high. Is there a way to fix the offset ?
Sport mode RPM DIAL for this dash is accurate, so OBD is reporting correctly.
When the car is at 1000 rpm, in race mode the RPM segment value is not accurate, about 1500rpm to high. Is there a way to fix the offset ?
Sport mode RPM DIAL for this dash is accurate, so OBD is reporting correctly.
Alright, will check.
Is there an offset for the display ? why is the sport mode correct ? thanks
Supercar 2 dash race mode seems to work correctly when tested with datalog playback. Have you done modifications to the dash?
No modifications, the rpm guage does not track correctly with true vehicle RPM guage in Race mode.
As I mentioned , in sport mode , the round dial is accurate.
Is the vehicle CVT by chance? Wondering if RPM would be affected by a change in sports mode. Is it scaling linearly? Like 1k rpm = 2.4k and 0 rpm = 1.4k rpm? or is it possibly a multiplier of 1.4?
Lastly have you tried using a different display to check RPM? Something more basic where it’s easier to check numbers on, like a basic dash with rpm text gauge?
The vehicle is not a CVT , Porsche Macan.
RPM reads correctly in sport mode, and in other RD’s.
Just the race mode in Supercar2, could anyone else check ??
Is it possible to have this fixed ?
I would need to be able to re-produce this error on our development environment before it can be fixed. Unfortunately it seems to work normally for me.